Hexafluorosilicic acid is an inorganic compound with the chemical formulaH 2SiF 6. Aqueous solutions of hexafluorosilicic acid consist of salts of the cation and hexafluorosilicate anion. These salts and their aqueous solutions are colorless.
Hexafluorosilicic acid is produced naturally on a large scale in volcanoes.[2][3] It is manufactured as a coproduct in the production of phosphate fertilizers. The resulting hexafluorosilicic acid is almost exclusively consumed as a precursor to aluminum trifluoride and synthetic cryolite, which are used in aluminium processing. Salts derived from hexafluorosilicic acid are called hexafluorosilicates.
Structure
Hexafluorosilicic acid has been crystallized as various hydrates. These include (H5O2)2SiF6, the more complicated (H5O2)2SiF6·2H2O, and (H5O2)(H7O3)SiF6·4.5H2O. In all of these salts, the octahedral hexafluorosilicate anion is hydrogen bonded to the cations.[4]
Aqueous solutions of hexafluorosilicic acid are often described as H 2SiF 6.
Production and principal reactions
Hexafluorosilicic acid is produced commercially from fluoride-containing minerals that also contain silicates. Specifically, apatite and fluorapatite are treated with sulfuric acid to give phosphoric acid, a precursor to several water-soluble fertilizers. This is called the wet phosphoric acid process.[5] As a by-product, approximately 50 kg of hexafluorosilicic acid is produced per tonne of HF owing to reactions involving silica-containing mineral impurities.[6]: 3
Some of the hydrogen fluoride (HF) produced during this process in turn reacts with silicon dioxide (SiO2) impurities, which are unavoidable constituents of the mineral feedstock, to give silicon tetrafluoride. Thus formed, the silicon tetrafluoride reacts further with HF.[citation needed] The net process can be described as:[7][page needed]
6 HF + SiO2 → SiF2−6 + 2 H3O+
Hexafluorosilicic acid can also be produced by treating silicon tetrafluoride with hydrofluoric acid.[7]
Reactions
Hexafluorosilic acid is only stable in hydrogen fluoride or acidic aqueous solutions. In any other circumstance, it acts as a source of hydrofluoric acid. Thus, for example, hexafluorosilicic acid pure or in oleum solution evolves silicon tetrafluoride until the residual hydrogen fluoride re-establishes equilibrium:[7]
H2SiF6 ⇌ 2 HF(l) + SiF4(g)
In alkaline-to-neutral aqueous solutions, hexafluorosilicic acid readily hydrolyzes to fluoride anions and amorphous, hydrated silica ("SiO2"). Strong bases give fluorosilicate salts at first, but any stoichiometric excess begins hydrolysis.[7] At the concentrations usually used for water fluoridation, 99% hydrolysis occurs:[6][8]
SiF2− 6 + 2 H2O → 6 F− + SiO2 + 4 H+
Alkali and alkaline earth salts
Neutralization of solutions of hexafluorosilicic acid with alkali metal bases produces the corresponding alkali metal fluorosilicate salts:
H2SiF6 + 2 NaOH → Na2SiF6 + 2 H2O
The resulting salt Na2SiF6 is mainly used in water fluoridation. Related ammonium and barium salts are produced similarly for other applications. At room temperature 15-30% concentrated hexafluorosilicic acid undergoes similar reactions with chlorides, hydroxides, and carbonates of alkali and alkaline earth metals.[9]
The majority of the hexafluorosilicic acid is converted to aluminium fluoride and synthetic cryolite. These materials are central to the conversion of aluminium ore into aluminium metal. The conversion to aluminium trifluoride is described as:[7]
H2SiF6 + Al2O3 → 2 AlF3 + SiO2 + H2O
Hexafluorosilicic acid is also converted to a variety of useful hexafluorosilicate salts. The potassium salt, Potassium fluorosilicate, is used in the production of porcelains, the magnesium salt for hardened concretes and as an insecticide, and the barium salts for phosphors.
Hexafluorosilicic acid is also used as an electrolyte in the Betts electrolytic process for refining lead.
Rust removers
Hexafluorosilicic acid (identified as hydrofluorosilicic acid on the label) along with oxalic acid are the active ingredients used in Iron Out rust-removing cleaning products, which are essentially varieties of laundry sour.
The application of hexafluorosilica acid to a calcium rich surface such as concrete will give that surface some resistance to acid attack.[13]
CaCO3 + H2O → Ca2+ + 2 OH− + CO2
H2SiF6 → 2 H+ + SiF2− 6
SiF2− 6 + 2 H2O → 6 F− + SiO2 + 4 H+
Ca2+ + 2 F− → CaF2
Calcium fluoride (CaF2) is an insoluble solid that is acid resistant.
Natural salts
Some rare minerals, encountered either within volcanic or coal-fire fumaroles, are salts of the hexafluorosilicic acid. Examples include ammonium hexafluorosilicate that naturally occurs as two polymorphs: cryptohalite and bararite.[14][15][16]
Safety
Hexafluorosilicic acid can release hydrogen fluoride (HF) when evaporated, so it has similar risks. Inhalation of the vapors may cause lung edema. Like hydrogen fluoride, it attacks glass and stoneware.[17] The LD50 value of hexafluorosilicic acid is 430 mg/kg.[6]
^Perrin, D. D., ed. (1982) [1969]. Ionisation Constants of Inorganic Acids and Bases in Aqueous Solution. IUPAC Chemical Data (2nd ed.). Oxford: Pergamon (published 1984). Entry 91. ISBN0-08-029214-3. LCCN82-16524.
^Palache, C., Berman, H., and Frondel, C. (1951) Dana’s System of Mineralogy, Volume II: Halides, Nitrates, Borates, Carbonates, Sulfates, Phosphates, Arsenates, Tungstates, Molybdates, etc. John Wiley and Sons, Inc., New York, 7th edition.
^Anthony, J.W., Bideaux, R.A., Bladh, K.W., and Nichols, M.C. (1997) Handbook of Mineralogy, Volume III: Halides, Hydroxides, Oxides. Mineral Data Publishing, Tucson.
^ abMootz, D.; Oellers, E.-J. (1988). "The Crystalline Hydrates of Hexafluorosilicic Acid: A Combined Phase-Analytical and Structural Study". Zeitschrift für anorganische und allgemeine Chemie. 559: 27–39. doi:10.1002/zaac.19885590103.
^Finney, William F.; Wilson, Erin; Callender, Andrew; Morris, Michael D.; Beck, Larry W. (2006). "Reexamination of Hexafluorosilicate Hydrolysis by 19F NMR and pH Measurement". Environ. Sci. Technol. 40 (8): 2572–2577. Bibcode:2006EnST...40.2572F. doi:10.1021/es052295s. PMID16683594.
^ abUs Granted A345458, Keith, C. Hansen & L. Yaws, Carl, "Patent Silicon tetrafluoride generation", published January 3, 1982, issued 1982
^Carsten Mai, Holger Militz (2004). "Modification of wood with silicon compounds. inorganic silicon compounds and sol-gel systems: a review". Wood Science and Technology. 37 (5): 339. doi:10.1007/s00226-003-0205-5. S2CID9672269.
^Pilcher, A. S.; DeShong, P. (2001). "Fluorosilicic Acid". Encyclopedia of Reagents for Organic Synthesis. John Wiley & Sons. doi:10.1002/047084289X.rf013. ISBN0471936235.
^Kruszewski, Łukasz; Fabiańska, Monika J.; Segit, Tomasz; Kusy, Danuta; Motyliński, Rafał; Ciesielczuk, Justyna; Deput, Ewa (2020). "Carbon‑nitrogen compounds, alcohols, mercaptans, monoterpenes, acetates, aldehydes, ketones, SF6, PH3, and other fire gases in coal-mining waste heaps of Upper Silesian Coal Basin (Poland) – a re-investigation by means of in situ FTIR external database approach". Science of the Total Environment. 698: 134274. Bibcode:2020ScTEn.698m4274K. doi:10.1016/j.scitotenv.2019.134274. PMID31509784. S2CID202563638.