Murray Valley Highway is a 663-kilometre (412 mi)[3] rural highway located in Victoria (with a short western tail in New South Wales), Australia, between Euston, New South Wales and Corryong, Victoria.[6] The popular tourist route mostly follows the southern bank of the Murray River and effectively acts as the northernmost highway in Victoria. For all but the western end's last three kilometres, the highway is allocated route B400.
Route
The western terminus of Murray Valley Highway at Euston, New South Wales.The eastern terminus of Murray Valley Highway at the Bringenbrong Bridge near Corryong, Victoria.
Most of the highway is fairly straight and flat, much of it through irrigated farmland. It becomes hillier and more winding east of Wodonga, with a moderately steep mountain pass near Shelley, midway between Tallangatta and Corryong.
History
Within Victoria, the passing of the Country Roads Act of 1912[7] through the Parliament of Victoria provided for the establishment of the Country Roads Board (later VicRoads) and their ability to declare Main Roads, taking responsibility for the management, construction and care of the state's major roads from local municipalities. Murray (River) Valley Road was declared a Main Road on 30 November 1914,[1] from Bonegilla over Sandy Creek (later to become Lake Hume), through Bethanga and Granya, following the course of the Murray River, to Burrowye; Kyabram-Nathalia Road from Wyuna to Nathalia (and continuing south to Kyabram), (Lake Boga-) Swan Hill Road from Lake Boga to Swan Hill, (Swan Hill-) Euston Road from Swan Hill through Nyah and Piangil to the punt over the Murray River to Euston, Yarrawonga-Cobram Road from Yarrawonga to Cobram, Cobram-Strathmerton Road from Cobram to Strathmerton, and Wangaratta-Yarrawonga Road between Bundalong and Yarrawonga (and continuing south to Wangaratta), were declared Main Roads on 17 March 1915;[8] and Rutherglen-Wodonga Road between Yarrawonga and Wodonga) was declared a Main Road on 28 May 1915.[9] Further sections were declared or built in the late 1920s and early 1930s by the Country Roads Board as part of a program of rural roads to facilitate development of the more remote parts of the state and provide connections between communities in addition to the roads and railways radiating out from Melbourne. Parts of the Murray River Valley Road included a stretch of newly constructed road between Mildura and the South Australian border, opened in 1927.[10][11] The eastern end of the road was re-aligned to run from Bethangra and Talgarno to Tallangatta and Bullioh, to accommodate the opening of Hume Dam and the filling of Lake Hume.
The passing of the Highways and Vehicles Act of 1924[12] through the Parliament of Victoria provided for the declaration of State Highways, roads two-thirds financed by the State government through the Country Roads Board. Murray Valley Highway was declared a State Highway in September 1932,[2] cobbled from a collection of existing and newly constructed roads running along the southern bank of the Murray River from Corryong through Walwa, Wodonga, Rutherglen, Yarrawonga, Cobram, Echuca, Swan Hill and Bannerton to the intersection with Calder Highway in Hattah, and again from Mildura to the state border with South Australian[13] (for a total of 513 miles), subsuming the original declarations of Murray River Valley Road, Ruthergen-Wodonga Road, Wangaratta-Yarrawonga Road (between Bundalong and Yarrawonga), Yarrawonga-Cobram Road, Cobram-Strathmerton Road, Kyabram-Nathalia Road (between Nathalia and Wyuna), Lake Boga-Swan Hill Road, and Swan Hill-Euston Road (between Swan Hill and Lake Powell) as Main Roads, and also a section of Omeo Highway between Tallangatta and Wodonga; the northern end of Omeo Highway was truncated to Tallangatta as a result.
Sturt Highway was rerouted to reach Renmark through Victoria instead of via Wentworth in 1939,[14] subsuming the alignment of the Murray Valley Highway between Mildura and the state border with South Australia; it was subsequently truncated to terminate at Calder Highway in Hattah. Robinvale Road, connecting the "irrigation settlement of Robinvale" to the highway, was declared a Main Road when it was surfaced for the first time in 1952,[15] and later declared a State Highway as Robinvale Highway on 9 May 1983, between Robinvale and Lake Powell.[16][17]
The alignment was further altered at both ends in 1990:
its western end, running from Lake Powell via Bannerton to Hattah, was re-aligned to run through Robinvale along Robinvale Highway instead, subsuming it to terminate just outside Euston, New South Wales in May 1990; the former alignment is now known as Hattah-Robinvale Road (signed route C252 in 1998).[18]
its eastern end, running through Thologolong, Walwa and Towong, was re-aligned to run along the more-direct, present-day route to Corryong (at the time named Tallangatta-Corryong Road) in June 1990; the former alignment is now known as Murray River Road (signed route C546 in 1998).[19]
The passing of the Road Management Act 2004[20] granted the responsibility of overall management and development of Victoria's major arterial roads to VicRoads: in 2004, VicRoads re-declared the road as Murray Valley Highway (Arterial #6570), beginning at the New South Wales border at Robinvale and ending at the New South Wales border in Towong Upper.[6]
The passing of the Main Roads (Amendment) Act of 1929[21] (which amended the original Main Roads Act of 1924[22]) through the Parliament of New South Wales on 8 April 1929 provided for the declaration of State Highways, Trunk Roads and Main Roads, partially funded by the New South Wales' state government through the Main Roads Board (later Transport for NSW). Main Road 583 was declared on 17 June 1959, from the intersection with State Highway 14 (Sturt Highway) at Euston to the state border with Victoria north of Robinvale;[23] this declaration as a Main Road did not change when the road on the Victorian side of the bridge was declared a State Highway (as Robinvale Highway in 1983 and then Murray Valley Highway in 1990), despite adopting its name as Murray Valley Highway from the Victorian side of the road to remain contiguous. The road today, as Main Road 583, still retains this declaration.[24]
Murray Valley Highway was signed National Route 16 across its entire length in 1955. With Victoria's conversion to the newer alphanumeric system in the late 1990s, its former route number was replaced by route B400 for the highway within Victoria; the New South Wales section was left signed as National Route 16 until switching to their alphanumeric system in 2013, after which it was left unallocated.[25]
Upgrades
Major roadworks have recently taken place around Echuca and Moama and are continuing. The project is being built in four stages:
Stage 1: Upgrade of the Murray Valley Highway and Warren Street intersection, completed in mid-2018
Stage 2: Warren Street upgrade, completed November 2019
Stage 3: Construction of new bridges over the Campaspe and Murray Rivers, major works started in March 2020
Stage 4: Intersection upgrades to the Cobb Highway, Meninya Street and Perricoota Road intersection (to be delivered by Transport for NSW), works started in March 2020.
The project is due for completion in mid-2022.[26]
^State Government of Victoria. "Road Management Act 2004"(PDF). Government of Victoria. Archived(PDF) from the original on 18 October 2021. Retrieved 19 October 2021.
^"Main Roads Act, 1924-1958". Government Gazette of the State of New South Wales. No. 75. 3 July 1959. p. 1990. Archived from the original on 19 October 2022. Retrieved 19 October 2022 – via National Library of Australia.