Punched tape

Five- and eight-hole wide punched paper tape
Creed model 6S/2 5-hole paper tape reader
Paper tape reader on the Harwell computer with a small piece of five-hole tape connected in a circle – creating a physical program loop

Punched tape or perforated paper tape is a form of data storage device that consists of a long strip of paper through which small holes are punched. It was developed from and was subsequently used alongside punched cards, the difference being that the tape is continuous.

Punched cards, and chains of punched cards, were used for control of looms in the 18th century. Use for telegraphy systems started in 1842. Punched tapes were used throughout the 19th and for much of the 20th centuries for programmable looms, teleprinter communication, for input to computers of the 1950s and 1960s, and later as a storage medium for minicomputers and CNC machine tools. During the Second World War, high-speed punched tape systems using optical readout methods were used in code breaking systems. Punched tape was used to transmit data for manufacture of read-only memory chips.

History

A paper tape, constructed from punched cards, in use in a Jacquard loom. The large holes on each edge are sprocket holes, used to pull the paper tape through the loom.

Perforated paper tapes were first used by Basile Bouchon in 1725 to control looms. However, the paper tapes were expensive to create, fragile, and difficult to repair. By 1801, Joseph Marie Jacquard had developed machines to create paper tapes by tying punched cards in a sequence for Jacquard looms. The resulting paper tape, also called a "chain of cards", was stronger and simpler both to create and to repair. This led to the concept of communicating data not as a stream of individual cards, but as one "continuous card" (or tape). Paper tapes constructed from punched cards were widely used throughout the 19th century for controlling looms. Many professional embroidery operations still refer to those individuals who create the designs and machine patterns as punchers even though punched cards and paper tape were eventually phased out in the 1990s.

In 1842, a French patent by Claude Seytre described a piano playing device that read data from perforated paper rolls. By 1900, wide perforated music rolls for player pianos were used to distribute popular music to mass markets.

Wheatstone slip with a dot, space and a dash punched, and perforator punch plate

In 1846, Alexander Bain used punched tape to send telegrams. This technology was adopted by Charles Wheatstone in 1857 for the Wheatstone system used for the automated preparation, storage and transmission of data in telegraphy.[1][2]

In the 1880s, Tolbert Lanston invented the Monotype typesetting system, which consisted of a keyboard and a composition caster. The tape, punched with the keyboard, was later read by the caster, which produced lead type according to the combinations of holes in up to 31 positions. The tape reader used compressed air, which passed through the holes and was directed into certain mechanisms of the caster. The system went into commercial use in 1897 and was in production well into the 1970s, undergoing several changes along the way.

Modern use

In the 21st century, punched tape is obsolete except among hobbyists. In computer numerical control (CNC) machining applications, though paper tape has been superseded by digital memory, some modern systems still measure the size of stored CNC programs in feet or meters, corresponding to the equivalent length if the data were actually punched on paper tape.[3]

Formats

Diagnostic minicomputer software on fanfold paper tape (1975)
Mylar punched tape was used for durability in industrial applications

Data was represented by the presence or absence of a hole at a particular location. Tapes originally had five rows of holes for data across the width of the tape. Later tapes had more rows. A 1944 electro-mechanical programmable calculating machine, the Automatic Sequence Controlled Calculator or Harvard Mark I, used paper tape with 24 rows,[4] The IBM Selective Sequence Electronic Calculator (SSEC) used paper tape with 74 rows.[5] Australia's 1951 electronic computer, CSIRAC, used 3-inch (76 mm) wide paper tape with twelve rows.[6]

A row of smaller sprocket holes was always punched to be used to synchronize tape movement. Originally, this was done using a wheel with radial teeth called a sprocket wheel. Later, optical readers made use of the sprocket holes to generate timing pulses. The sprocket holes were slightly closer to one edge of the tape, dividing the tape into unequal widths, to make it unambiguous which way to orient the tape in the reader. The bits on the narrower width of the tape were generally the least significant bits when the code was represented as numbers in a digital system.[citation needed]

Materials

Many early machines used oiled paper tape, which was pre-impregnated with a light machine oil, to lubricate the reader and punch mechanisms. The oil impregnation usually made the paper somewhat translucent and slippery, and excess oil could transfer to clothing or any surfaces it contacted. Later optical tape readers often specified non-oiled opaque paper tape, which was less prone to depositing oily debris on the optical sensors and causing read errors. Another innovation was fanfold paper tape, which was easier to store compactly and less prone to tangling, as compared to rolled paper tape.

For heavy-duty or repetitive use, polyester Mylar tape was often used. This tough, durable plastic film was usually thinner than paper tapes, but could still be used in many devices originally designed for paper media. The plastic tape was sometimes transparent, but usually was aluminized to make it opaque enough for use in high-speed optical readers.

Dimensions

Tape for punching was usually 0.00394 inches (0.100 mm) thick. The two most common widths were 1116 inch (17 mm) for five bit codes, and 1 inch (25 mm) for tapes with six or more bits. Hole spacing was 0.1 inches (2.5 mm) in both directions. Data holes were 0.072 inches (1.8 mm) in diameter; sprocket feed holes were 0.046 inches (1.2 mm).[7]

Chadless tape

Chadless 5-level Baudot paper tape c. 1975–1980 punched at Teletype Corp

Most tape-punching equipment used solid circular punches to create holes in the tape. This process created "chad", or small circular pieces of paper. Managing the disposal of chad was an annoying and complex problem, as the tiny paper pieces had a tendency to escape containment and to interfere with the other electromechanical parts of the teleprinter equipment. Chad from oiled paper tape was particularly problematic, as it tended to clump and build up, rather than flowing freely into a collection container.

A variation on the tape punch was a device called a Chadless Printing Reperforator. This machine would punch a received teleprinter signal into tape and print the message on it at the same time, using a printing mechanism similar to that of an ordinary page printer. The tape punch, rather than punching out the usual round holes, would instead punch little U-shaped cuts in the paper, so that no chad would be produced; the "hole" was still filled with a little paper trap-door. By not fully punching out the hole, the printing on the paper remained intact and legible. This enabled operators to read the tape without having to decipher the holes, which would facilitate relaying the message on to another station in the network. Also, there was no "chad box" to empty from time to time.

A disadvantage to this technology was that, once punched, chadless tape did not roll up well for storage, because the protruding flaps of paper would catch on the next layer of tape so it could not be coiled up tightly. Another disadvantage that emerged in time, was that there was no reliable way to read chadless tape in later high-speed readers which used optical sensing. However, the mechanical tape readers used in most standard-speed equipment had no problem with chadless tape, because they sensed the holes by means of blunt spring-loaded mechanical sensing pins, which easily pushed the paper flaps out of the way.

Encoding

The word "Wikipedia", and a CR/LF as 7-bit ASCII, without a parity bit, least significant bit on the right—e.g. "W" is 1010111

Text was encoded in several ways. The earliest standard character encoding was Baudot, which dates back to the 19th century and had five holes. The Baudot code was superseded by modified five-hole codes such as the Murray code (which added carriage return and line feed) which was developed into the Western Union code which was further developed into the International Telegraph Alphabet No. 2 (ITA 2), and a variant called the American Teletypewriter code (USTTY).[8] Other standards, such as Teletypesetter (TTS), FIELDATA and Flexowriter, had six holes. In the early 1960s, the American Standards Association led a project to develop a universal code for data processing, which became the American Standard Code for Information Interchange (ASCII). This seven-level code was adopted by some teleprinter users, including AT&T (Teletype). Others, such as Telex, stayed with the earlier codes.

Applications

Communications

Teletype 33 Automatic Send and Receive teleprinter with paper tape in both the reader and the punch
Paper tape relay operation at US FAA's Honolulu flight service station in 1964

Punched tape was used as a way of storing messages for teletypewriters. Operators typed in the message to the paper tape, and then sent the message at the maximum line speed from the tape. This permitted the operator to prepare the message "off-line" at the operator's best typing speed, and permitted the operator to correct any error prior to transmission. An experienced operator could prepare a message at 135 words per minute (WPM) or more for short periods.

The line typically operated at 75 WPM, but it operated continuously. By preparing the tape "off-line" and then sending the message with a tape reader, the line could operate continuously rather than depending on continuous "on-line" typing by a single operator. Typically, a single 75 WPM line supported three or more teletype operators working offline. Tapes punched at the receiving end could be used to relay messages to another station. Large store and forward networks were developed using these techniques.

Paper tape could be read into computers at up to 1,000 characters per second.[9] In 1963, a Danish company called Regnecentralen introduced a paper tape reader called RC 2000 that could read 2,000 characters per second; later they increased the speed further, up to 2,500 cps. As early as World War II, the Heath Robinson tape reader, used by Allied codebreakers, was capable of 2,000 cps while Colossus could run at 5,000 cps using an optical tape reader designed by Arnold Lynch.

Minicomputers

A 24-channel program tape for the Harvard Mark I (c. 1944)

When the first minicomputers were being released, most manufacturers turned to the existing mass-produced ASCII teleprinters (primarily the Teletype Model 33, capable of ten ASCII characters per second throughput) as a low-cost solution for keyboard input and printer output. The commonly specified Model 33 ASR included a paper tape punch/reader, where ASR stands for "Automatic Send/Receive" as opposed to the punchless/readerless KSR – Keyboard Send/Receive and RO – Receive Only models. As a side effect, punched tape became a popular medium for low-cost minicomputer data and program storage, and it was common to find a selection of tapes containing useful programs in most minicomputer installations. Faster optical readers were also common.

Binary data transfer to or from these minicomputers was often accomplished using a doubly encoded technique to compensate for the relatively high error rate of punches and readers. The low-level encoding was typically ASCII, further encoded and framed in various schemes such as Intel Hex, in which a binary value of "01011010" would be represented by the ASCII characters "5A". Framing, addressing and checksum (primarily in ASCII hex characters) information helped with error detection. Efficiencies of such an encoding scheme are on the order of 35–40% (e.g., 36% from 44 8-bit ASCII characters being needed to represent sixteen bytes of binary data per frame).

Computer-aided manufacturing

Paper tape reader on a computer numerical control (CNC) machine

In the 1970s, computer-aided manufacturing equipment often used paper tape. A paper tape reader was smaller and less expensive than Hollerith card or magnetic tape readers, and the medium was reasonably reliable in a manufacturing environment. Paper tape was an important storage medium for computer-controlled wire-wrap machines, for example.

Premium black waxed and lubricated long-fiber papers, and Mylar film tape were developed so that heavily used production tapes would last longer.

Data transfer for ROM and EPROM programming

In the 1970s through the early 1980s, paper tape was commonly used to transfer binary data for incorporation in either mask-programmable read-only memory (ROM) chips or their erasable counterparts EPROMs. A significant variety of encoding formats were developed for use in computer and ROM/EPROM data transfer.[10] Encoding formats commonly used were primarily driven by those formats that EPROM programming devices supported and included various ASCII hex variants as well as a number of proprietary formats.

A much more primitive as well as a much longer high-level encoding scheme was also used, BNPF (Begin-Negative-Positive-Finish),[11][12] also written as BPNF (Begin-Positive-Negative-Finish).[13] In BNPF encoding, a single byte (8 bits) would be represented by a highly redundant character framing sequence starting with a single uppercase ASCII "B", eight ASCII characters where a "0" would be represented by a "N" and a "1" would be represented by a "P", followed by an ending ASCII "F".[11][13][12] These ten-character ASCII sequences were separated by one or more whitespace characters, therefore using at least eleven ASCII characters for each byte stored (9% efficiency). The ASCII "N" and "P" characters differed in four bit positions, providing excellent protection from single punch errors. Alternative schemes named BHLF (Begin-High-Low-Finish) and B10F (Begin-One-Zero-Finish) were also available where either "L" and "H" or "0" and "1" were also available to represent data bits,[14] but in both of these encoding schemes, the two data-bearing ASCII characters differ in only one bit position, providing very poor single punch error detection.

Cash registers

NCR of Dayton, Ohio, made cash registers around 1970 that would punch paper tape. Sweda made similar cash registers around the same time. The tape could then be read into a computer and not only could sales information be summarized, billings could be done on charge transactions. The tape was also used for inventory tracking, recording department and class numbers of items sold.

Newspaper industry

Punched paper tape was used by the newspaper industry until the mid-1970s or later. Newspapers were typically set in hot lead by devices like Linotype machines. With the wire services coming into a device that would punch paper tape, rather than the Linotype operator having to retype all the incoming stories, the paper tape could be put into a paper tape reader on the Linotype and it would create the lead slugs without the operator re-typing the stories. This also allowed newspapers to use devices, such as the Friden Flexowriter, to convert typing to lead type via tape. Even after the demise of Linotype and hot lead typesetting, many early phototypesetter devices utilized paper tape readers.

If an error was found at one position on the six-level tape, that character could be turned into a null character to be skipped by punching out the remaining non-punched positions with what was known as a “chicken plucker". It looked like a strawberry stem remover that, pressed with thumb and forefinger, could punch out the remaining positions, one hole at a time.

Cryptography

This secure paper tape canister shows evidence of tampering

Vernam ciphers were invented in 1917 to encrypt teleprinter communications using a key stored on paper tape. During the last third of the 20th century, the National Security Agency (NSA) used punched paper tape to distribute cryptographic keys. The eight-level paper tapes were distributed under strict accounting controls and read by a fill device, such as the hand held KOI-18, that was temporarily connected to each security device that needed new keys. NSA has been trying to replace this method with a more secure electronic key management system (EKMS), but as of 2016, paper tape was apparently still being employed.[15] The paper tape canister is a tamper-resistant container that contains features to prevent undetected alteration of the contents.

Advantages and limitations

Acid-free paper or Mylar tapes can be read many decades after manufacture, in contrast with magnetic tape that can deteriorate and become unreadable with time. The hole patterns of punched tape can be decoded by eye if necessary, and even editing of a tape is possible by manual cutting and splicing. Unlike magnetic tape, magnetic fields such as produced by electric motors cannot alter the punched data.[16] In cryptography applications, a punched tape used to distribute a key can be rapidly and completely destroyed by burning, preventing the key from falling into the hands of an enemy.

Reliability of paper tape punching operations was a concern, so that for critical applications a new punched tape could be read after punching to verify the correct contents. Rewinding a tape required a takeup reel or other measures to avoid tearing or tangling the tape. [citation needed] In some uses, "fan fold" tape simplified handling as the tape would refold into a "takeup tank" ready to be re-read. The information density of punched tape was low compared with magnetic tape, making large datasets clumsy to handle in punched tape form.

See also

References

  1. ^ Maxfield, Clive (2011-10-13). "How it was: Paper tapes and punched cards". EE Times.
  2. ^ Roberts, Steven. "3. Cooke and Wheatstone". Distant Writing: A History of the Telegraph Companies in Britain between 1838 and 1868.
  3. ^ Smid, Peter (2010). CNC Control Setup for Milling and Turning: Mastering CNC Control Systems. Industrial Press. p. 20. ISBN 978-0-8311-3350-4.
  4. ^ Dalakov, Georgi, History of computers: The MARK computers of Howard Aiken, retrieved 2011-01-12
  5. ^ da Cruz, Frank (April 2021). "SSEC Tape". Columbia University Computing History. Retrieved 2024-05-25.
  6. ^ "CSIRAC paper tape (replica)". Computer History Museum. 2010. Retrieved 2023-10-13.
  7. ^ Lancaster, Don (2010), TV Typewriter Cookbook (PDF), Synergetics SP Press, p. 211
  8. ^ Proesch, Roland (2009). Technical Handbook for Radio Monitoring HF: Edition 2009. Books on Demand. ISBN 978-3837045734.
  9. ^ Hult, Ture (1963), "Presentation of a new high speed paper tape reader", BIT Numerical Mathematics, 3 (2): 93–96, doi:10.1007/BF01935575, S2CID 61020497
  10. ^ "Translation File Formats" (PDF). Data I/O Corporation. Retrieved 2010-08-30.
  11. ^ a b "Appendix A: A Sample Program in PL/M: BNPF Object Tape". MCS-8 A Guide to PL/M programming (PDF). Rev 1 (printed September 1974 ed.). 1974-03-15 [September 1973]. p. 101. MCS180-0774-1K, MCS280-0974-1K. Archived (PDF) from the original on 2022-01-29. Retrieved 2022-05-18. (1+i+100+1+11+1 pages)
  12. ^ a b Feichtinger, Herwig (1987). "1.8.5. Lochstreifen-Datenformate" [1.8.5. Paper tape data formats]. Arbeitsbuch Mikrocomputer [Microcomputer work book] (in German) (2 ed.). Munich, Germany: Franzis-Verlag GmbH. pp. 240–243. ISBN 3-7723-8022-0. (NB. The book contains a description of the BNPF format.)
  13. ^ a b "Chapter 6. Microcomputer System Component Data Sheet - EPROMs and ROM: I. PROM and ROM Programming Instructions - B2. BPNF Paper Tape Format". MCS-80 User's Manual (With Introduction to MCS-85). Intel Corporation. October 1977 [1975]. pp. 6–76. 98-153D. Retrieved 2020-02-27. [1][2] (NB. This manual describes a "BPNF Paper Tape Format", a "Non-Intellec Hex Paper Tape Format" and a "PN Computer Punched Card Format".)
  14. ^ "A. Serial Data Transfer Formats: ASCII BPNF, BHLF & B10F Formats". XP640 EPROM Programmer - User Manual (PDF). GP Industrial Electronics. 1984. p. 43. Archived (PDF) from the original on 2023-10-22. Retrieved 2023-10-22. (47 pages)
  15. ^ "Tale of the Tape". National Security Agency Central Security Service. 2016-05-03. Archived from the original on 2021-09-23. Retrieved 2014-06-16.
  16. ^ Sinha, Naresh K. (1986-06-30). Microprocessor-Based Control Systems. Springer. p. 264. ISBN 978-90-277-2287-4.

Read other articles:

Artikel ini sebatang kara, artinya tidak ada artikel lain yang memiliki pranala balik ke halaman ini.Bantulah menambah pranala ke artikel ini dari artikel yang berhubungan atau coba peralatan pencari pranala.Tag ini diberikan pada Januari 2023. Parmena novaki Klasifikasi ilmiah Kerajaan: Animalia Filum: Arthropoda Kelas: Insecta Ordo: Coleoptera Famili: Cerambycidae Genus: Parmena Spesies: Parmena novaki Parmena novaki adalah spesies kumbang tanduk panjang yang tergolong famili Cerambycidae. Spe…

DPANN Parvarchaeum acidiphilum Klasifikasi ilmiah Domain: Arkea Superfilum: Grup DPANN Phyla[1] Aenigmarchaeota Altiarchaeota Diapherotrites Mamarchaeota Micrarchaeota Nanoarchaeota Nanohaloarchaeota Pacearchaeota Parvarchaeota Undinarchaeota Woesearchaeota DPANN adalah superfilum Arkea yang pertama kali diusulkan pada 2013. Banyak anggota menunjukkan tanda baru transfer gen horizontal dari domain lain kehidupan. DPANN adalah akronim yang dibentuk dari inisial lima kelompok pertama yang …

Haakon IVStempel Haakon, dari surat 1247/48 (dengan terbalik). Segel tersebut diberikan kepada Haakon sebagai hadiah dari Henry III dari Inggris pada tahun 1236.Raja NorwegiaBerkuasaJuni 1217 – 16 Desember1263Penobatan29 Juli 1247 (Bergen)PendahuluInge IIPenerusMagnus VIRaja juniorHaakon the Young (1240–57)Magnus VI (1257–63)Informasi pribadiKelahiranca. Maret/April 1204Folkenborg, NorwayKematian16 Desember 1263(1263-12-16) (umur 59)Kirkwall, Orkney, NorwegiaWangsaSverreAyahHaakon III…

Biografi ini tidak memiliki sumber tepercaya sehingga isinya tidak dapat dipastikan. Bantu memperbaiki artikel ini dengan menambahkan sumber tepercaya. Materi kontroversial atau trivial yang sumbernya tidak memadai atau tidak bisa dipercaya harus segera dihapus.Cari sumber: Iron Maiden – berita · surat kabar · buku · cendekiawan · JSTOR (Pelajari cara dan kapan saatnya untuk menghapus pesan templat ini) Untuk alat penyiksa, lihat Iron maiden (alat). Iron …

Lo zigote, dal greco antico ζυγωτός (zygōtós): unito o aggiogato, è una cellula che si ottiene con la fecondazione, ovvero dalla fusione di due cellule specializzate (i gameti, maschile e femminile), normalmente aploidi (n), in una cellula con un maggior grado di ploidia, normalmente diploide (2n). Indice 1 Significato biologico di zigote 2 La divisione dello zigote nella specie umana 3 Note 4 Voci correlate 5 Altri progetti 6 Collegamenti esterni Significato biologico di zigote FASE C…

Aku Pasti DatangAlbum studio karya Utha LikumahuwaDirilis1985GenrePopDurasi43:56LabelJackson RecordsProduserJackson AriefKronologi Utha Likumahuwa Bersatu Dalam Damai (1983)'Bersatu Dalam Damai'1983 Aku Pasti Datang (1985) Aku Tetap Cinta (1986)'Aku Tetap Cinta'1986 Sampul alternatif Aku Pasti Datang adalah album keempat dari penyanyi Utha Likumahuwa yang dirilis pada tahun 1985 dengan label Jackson Records. Album ini ditangani penuh oleh Addie MS sebagai direktur musik. Album Aku Pasti Data…

ورستبورو     الإحداثيات 41°34′38″N 74°29′04″W / 41.5772°N 74.4844°W / 41.5772; -74.4844   [1] تقسيم إداري  البلد الولايات المتحدة[2]  التقسيم الأعلى مقاطعة سوليفان  خصائص جغرافية  المساحة 3.235324 كيلومتر مربع3.279682 كيلومتر مربع (1 أبريل 2010)  ارتفاع 176 متر  عدد ال…

Radio station in Nevada, United StatesKQRTLas Vegas, NevadaUnited StatesBroadcast areaLas Vegas ValleyFrequency105.1 MHz (HD Radio)BrandingLa Tricolor 105.1ProgrammingFormatRegional MexicanOwnershipOwnerEntravision Communications(Entravision Holdings, LLC)Sister stationsKRNV-FM, KRRNHistoryFirst air dateSeptember 1993 (1993-09)Former call signsKRBO (1993–1996)KVBC-FM (1996–2000)KRRN (2000–2003)Call sign meaningFor Radio TricolorTechnical information[1]Licensing authorityF…

Yeonhwamu, salah satu tarian istana Korea. Tarian istana Korea adalah tarian Korea yang dipentaskan di istana.[1] Sejarah Tarian ini ditampilkan oleh para penari profesional untuk tujuan kesenangan dan memiliki karakter yang berbeda dari tarian festival istana atau tarian rakyat yang mengikutsertakan orang-orang untuk menari bersama. Berdasarkan lukisan di makam dinding Goguryeo, dipercaya tarian istana Korea telah ada sejak zaman Tiga Kerajaan. Tari istana dinamakan juga Jeongjae yang d…

Constituency of Bangladesh's Jatiya Sangsad Mymensingh-9Constituencyfor the Jatiya SangsadDistrictMymensingh DistrictDivisionMymensingh DivisionElectorate294,105 (2018)[1]Current constituencyCreated1973PartyAwami LeagueMember(s)Abdus Salam (general) Mymensingh-9 is a constituency represented in the Jatiya Sangsad (National Parliament) of Bangladesh since 2024 by Major General (Rtd) Abdus Salam of the Awami League. Boundaries The constituency encompasses Nandail Upazila.[2][3&…

Pour les articles homonymes, voir Angelico. Adam BridleDonnées généralesNom de naissance Adam BridleNom de ring Adam AngelAdam CroftAdam BridleAngélicoAdam BridleBackpacker JoeEl AngélicoNationalité sud-africainNaissance 7 mai 1987 (36 ans)Johannesburg, Afrique du SudTaille 6′ 3″ (1,91 m)[1]Poids 213 lb (97 kg)[1]Catcheur en activitéFédération Lucha UndergroundEntraîneur Black TerryNegro NavarroUltimo DragonCarrière pro. 2007 - aujourd'huimodifier - modifi…

Questa voce sull'argomento calciatori francesi è solo un abbozzo. Contribuisci a migliorarla secondo le convenzioni di Wikipedia. Segui i suggerimenti del progetto di riferimento. Roger Rolhion Nazionalità  Francia Altezza 178 cm Calcio Ruolo Difensore Carriera Squadre di club1 1927-1935 Montpellier112+ (17+)1935-1939 Saint-Étienne128+ (11+)1942-1943 Saint-Étienne? (?)1943-1944 ÉF Lyon-Lyonnais8 (1) Nazionale 1931-1932 Francia4 (2) Carriera da allenatore 1954-1…

American gridiron football player (born 1986) American football player Matt GrotheNo. 8Position:QuarterbackPersonal informationBorn: (1986-09-08) September 8, 1986 (age 37)Lakeland, Florida, U.S.Height:6 ft 0 in (1.83 m)Weight:205 lb (93 kg)Career informationHigh school:Lake Gibson(Lakeland, Florida)College:South Florida (2005–2009)Undrafted:2010Career history Florida Tuskers (2010)* Toronto Argonauts (2010)* Tampa Bay Storm (2011–2012) Orlando Predators (2012) …

Halaman ini berisi artikel tentang istilah musikal. Untuk kegunaan lain, lihat Antifon (disambiguasi). Liber responsorialis, antifon untuk ofisi malam Natal di halaman kanan. Nada-nada Mazmur terkait ditandai dengan nomor dan nada akhir; nada-nada untuk akhir doksologi ditunjukkan dengan huruf-huruf hidup: et in secula seculorum amen. Antifon (Yunani: ἀντίφωνον, ἀντί berlawanan atau seberang dan φωνή suara) dalam ritual dan musik Kristen adalah suatu responsorium (tanggapa…

Syrian human rights lawyer and activist Razan Zaitounehرزان زيتونةUndated picture of Razan ZaitounehBorn(1977-04-29)29 April 1977SyriaDisappeared9 December 2013 (aged 36) [1]Douma, Syria[1]StatusMissing for 10 years, 4 months and 18 days[2]EducationLaw degreeOccupationHuman rights lawyerOrganization(s)Local Coordination Committees of Syria,[1] Violations Documentation Center in Syria[1]Known forhuman rights activism durin…

Sri Lankan filmmaker (born 1962) This biography of a living person needs additional citations for verification. Please help by adding reliable sources. Contentious material about living persons that is unsourced or poorly sourced must be removed immediately from the article and its talk page, especially if potentially libelous.Find sources: Prasanna Vithanage – news · newspapers · books · scholar · JSTOR (June 2017) (Learn how and when to remove this mess…

將軍巴育·占奥差ประยุทธ์ จันทร์โอชา上將 MPCh MWM TChW 泰國樞密院議員现任就任日期2023年11月29日君主拉瑪十世議長素拉育·朱拉暖 泰國第29任總理任期2022年9月30日復職—2023年8月22日君主拉瑪十世副總理(英语:Deputy Minister of Thailand) 列表 巴威·翁素万塔那塞·巴滴玛巴功(英语:Thanasak Patimaprakorn) 威沙努·革岸(英语:Wissanu Krea-ngam) 比蒂耶通·…

FC Seoul FC 서울Calcio Segni distintiviUniformi di gara Casa Trasferta Colori sociali Nero, rosso Dati societariCittàSeul Nazione Corea del Sud ConfederazioneAFC Federazione KFA CampionatoK-League Fondazione1983 Presidente Huh Chang-soo Allenatore Choi Yong-soo StadioSeoul World Cup Stadium(66.704 posti) Sito webhttp://www.fcseoul.com PalmarèsTitoli nazionali6 K-League Trofei nazionali2 Coppe della Corea del Sud1 Supercoppa della Corea del Sud Si invita a seguire il modello di voce Il F…

Державний комітет телебачення і радіомовлення України (Держкомтелерадіо) Приміщення комітетуЗагальна інформаціяКраїна  УкраїнаДата створення 2003Керівне відомство Кабінет Міністрів УкраїниРічний бюджет 1 964 898 500 ₴[1]Голова Олег НаливайкоПідвідомчі орг…

此條目需要补充更多来源。 (2021年7月4日)请协助補充多方面可靠来源以改善这篇条目,无法查证的内容可能會因為异议提出而被移除。致使用者:请搜索一下条目的标题(来源搜索:美国众议院 — 网页、新闻、书籍、学术、图像),以检查网络上是否存在该主题的更多可靠来源(判定指引)。 美國眾議院 United States House of Representatives第118届美国国会众议院徽章 众议院旗帜…

Kembali kehalaman sebelumnya